1.重叠式走纸 2.纸堆高度 飞达送纸 1000mm 收纸 1500mm 3.可调裱卡纸厚度4.节省胶水（环保）1. overlapping paper 2. paper stack height reaching 1050mm feeding paper 1600mm 3. adjustable paper thickness 4. save glue (environmental protection)
zbk-1150型全自动卡纸裱合机，面纸侧和底纸侧分别配置高速输纸机，采用重叠式连续走纸，真空吸纸，双侧各配置双高精度定位拉规，以达到更高的送纸速度及精度。底，面纸由一对高强度咬纸复合辊定位，咬合，初压后进入多道重压压合辊后，由后输送传至收纸机，经三面齐纸自动堆积至1600mm。该机配置国际知名电气（台达，施耐德），多级压力设置，自动控制液压站。成品具有高精度的贴合度，底，面纸贴合牢固，平整，湿度低，可立即进入模切等后道工序而不需等待固化。bk-1150 full-automatic paper-jacking and laminating machine is equipped with high-speed paper feeder on both sides of surface paper and bottom paper. the machine adopts overlapping continuous paper feeding and double high-precision positioning and drawing gauges on both sides to achieve higher paper feeding speed and precision. at the bottom, the paper is positioned and occluded by a pair of high-strength paper-biting composite rolls. after initial pressing, the paper enters the multi-channel heavy-pressing press rolls, and then transfers to the paper collector. the paper is automatically stacked up to 1600 mm through three-sided alignment. the machine is equipped with internationally renowned electrical (delta, schneider), multi-stage pressure settings, automatic control hydraulic station. the finished product has high precision bonding degree, bottom, surface paper bonding firmly, flat, low humidity, can immediately enter the die cutting and other subsequent processes without waiting for solidification.